Got performance questions or a success story? Let the world know, and push the limits of your scoot!
2 posts • Page 1 of 1
Hi all im new to form and would like to here people ideas. Im woking on a yq100 and i only seem to read about how bad they are and to never try tuning one just get a 50 well got one of them as well lol. Easy is easy hard is rewarding how i see it. Well i got myself a yq100 for $100 great deal he had left it till it was hydro locked from fuel over the months sitting so i got cheap. Got given the 50cc and a red devil/12 model 4000km free yes free and 4 othere scooter as well so i desidrd to do a bigbor stroker on the 100.have a alloy 9 port 57mm barell and a 52mm hih comp crank and to my amasment the barrel is matched ported allready and stroker crank fits with 1mm gap to case will need to releve case a very small amount for rod. I thought i would have had to get a fair bit of work done on cases to fit everything. Now the barell is 5mm longer than normal and thicker sides for porting to be done it is made expecting you to do a lot of porting love it and way im thinking 180/130 port timing is this a bit high or low want power dont care about top end ill gear it later lol and understand my be a pig off the line if i go to wild as i said all new to this never done one befor but im good with motors and understand 2strokes
- 20171104_114709.jpg (778.28 KiB) Viewed 1073 times
- Gap 1mm
- 20171103_132618.jpg (1.19 MiB) Viewed 1073 times
- 57mm 9port barell
- 20171103_132523.jpg (1.16 MiB) Viewed 1074 times
- 52mm stroker crank
- 20171104_065654.jpg (1.31 MiB) Viewed 1074 times
- 20171104_114659.jpg (867.8 KiB) Viewed 1074 times
- Site Admin
- Posts: 5274
- Joined: Tue Jul 10, 2007 11:39 pm
- Location: Haw River, NC United States of America!
Hey man, this is an awesome project! I am following with great interest.
"The more a man learns, the more he realizes how little he knows."
Who is online
Users browsing this forum: No registered users and 10 guests